Perancangan Mesin Pengolah Sampah Plastik Jenis Polyehthylene Terephthalate (PET) Menjadi Biji Plastik Dengan Metode Ekstrusi

  • Muhammad Ihda Alwan Politeknik Negeri Bandung
  • Devi Eka Septiyani Arifin Politeknik Negeri Bandung
  • Rudy Yuni Widiatmoko Politeknik Negeri Bandung
DOI: https://doi.org/10.52158/jamere.v5i2.922
I will put the dimension here
Keywords: Plastic Extrusion, Design, PET Waste, Plastic Seeds, Waste treatment

Abstract

A plastic extrusion machine is a tool that can be used to process plastic waste into plastic pellets which can be reused to produce plastic products. Therefore, learning and applying these tools is useful for reprocessing plastic waste which is currently increasing. However, it is a shame that the tools currently on the market are relatively uneconomical for institutional scale processing, because the majority of tools on the market are intended for industrial scale. The output of this design produces a prototype tool with dimensions of 1005x350x830 mm and a capacity of 376 grams/hour. Maximum total energy consumption is less than 1 kW. The design of this plastic extrusion machine uses a screw conveyor, a 200Watt band heater and has 2 functions in 1 machine. The first function is to extrude chopped PET plastic and the second function is to cut the extrusion product so that the output of this machine is plastic pellets.

References

[1] A. W.Finaka, “Berapa Lama Sampah Plastik Bisa Terurai,” Indonesia Baik.Id, 2022.
[2] S. J. Zulfan Arico, “Pengolahan limbah plastik menjadi produk kreatif sebagai peningkatan ekonomi masyarakat pesisir,” Martabe Jurnal Pengabdian Masyarakat, p. 2, 2017.
[3] I. Rahmawati, “Daur Ulang Limbah Botol Plastik Polyehtylene Terephthalate (PET) Menjadi Cabon Nanodots Untuk Pigmen Fluoresen,” Jurusan Fisika, Universitas Negeri Semarang, Semarang, 2018.
[4] S. P. d. M. A. L. Budhi Martana, “Perancangan mesin ekstrusi untuk daur ulang limbah plastik berbentuk silinder,” POLITEKNOLOGI, vol. 19, no. 3, p. 1, 2020.
[5] R. M. B. Dani Irawan, “RANCANG BANGUN PROTOTYPE MESIN EKSTRUSI POLIMER SINGLE SCREW,” UNWAHA, pp. 2654-3184, 2018.
[6] R. S. N. Yudhi Chandra Dwiaji, “Perancangan Mesin Pembuat Pellet Untuk Campuran Cangkang Telur Sebagai Konsentrat Kapasitas 10 kg/jam Dengan Metode Phal dan Beitz,” JAMERE, vol. III, no. 2, pp. 57-68, 2023.
[7] Pahl, Gerhard, Feldhusen, Joerg, Grote and Karl, Engineering Design: A Systematic Approach. 3. s.1, London: Springer-Verlag, 2007.
Published
2025-08-01
How to Cite
Ihda Alwan, M., Eka Septiyani Arifin, D., & Yuni Widiatmoko, R. (2025). Perancangan Mesin Pengolah Sampah Plastik Jenis Polyehthylene Terephthalate (PET) Menjadi Biji Plastik Dengan Metode Ekstrusi. Journal of Applied Mechanical Engineering and Renewable Energy, 5(2), 69-76. https://doi.org/10.52158/jamere.v5i2.922
Section
Articles