Studi Pengaruh Perbedaan Metode Perawatan Beton Terhadap Kuat Tekan Beton

  • Irawan Irawan saputra Politeknik negeri banyuwangi
  • Mirza Ghulam Rifqi Politeknik Negeri Banyuwangi
  • M. Shofi’ul Amin Politeknik Negeri Banyuwangi
DOI: https://doi.org/10.52158/jaceit.v1i1.22
I will put the dimension here
Keywords: soaking, wrapped with plastic sheets, curing compound, strong concrete press

Abstract

The process of bonding cement with water in the manufacture of concrete will cause side effects of rising temperature in concrete commonly called the hydration process. Heat hydration is too high can result in cracks in the concrete, therefore the need to do concrete maintenance work that serves to maintain the stability and availability of water in the concrete during the hydration process. The study uses cylinder-shaped test objects with a diameter of 15 cm and a height of 30 cm. There are 36 test objects and three types of treatments to be used in the study, i.e. soaking treatment, treatment wrapped with a plastic sheet, and curing compound treatment. Strong press testing is done at the age of 7, 14, and 28 days. Results of the study showed strong press pressing age 7 days concrete type with soaking treatment, treatment wrapped with a plastic sheet, and a consecutive curing compound treatment 0.38 MPa, 1.68 MPa and 2.29 MPa. Strong Test press Age 14 days concrete type with soaking treatment, treatment wrapped with a plastic sheet, and curing compound treatment consecutive 21.97 MPa, 21.59 MPa, 20.29 MPa. Strong Test Press Age 28-day type of concrete with soaking treatment, treatment wrapped with a plastic sheet, and the curing of the successive compound maintenance 25.89 MPa, 23.78 MPa, and 22.48 MPa.

References

Syahar, A., 2015. Pengaruh Cara Perawatan Terhadap Kuat Lentur Beton. Yogyakarta: Politeknik Negeri Yogyakarta.

Rao, K., Kumar, R., & Khan, A. M., 2010. A Study on the Influence of Curing on the Strength of a Standart Grade Concrete Mix. Architecture and Civil Engineering Vol. 8, No 1, 23-24.

ASTM C171-07., 2007. Standart Specification for Sheet Materials for Curing Compound. United States: American Society for Testing and Materials.

Johan Oberlyn Simajutak, T. E., 2015. Hubungan Perawatan Beton Dengan Tekan. Medan: Lembaga Penelitian Kuat Universitas HKBP Nommensen.

SNI-03-2834-2000., 2000. Tata Cara Pembuatan Rencana Campuran Beton Normal. Jakarta: Badan Standarisasi Nasional.

Published
2020-08-03
How to Cite
Irawan saputra, I., Mirza Ghulam Rifqi, & M. Shofi’ul Amin. (2020). Studi Pengaruh Perbedaan Metode Perawatan Beton Terhadap Kuat Tekan Beton. Journal of Applied Civil Engineering and Infrastructure Technology, 1(1), 15-19. https://doi.org/10.52158/jaceit.v1i1.22
Section
Articles