PENGARUH JARAK ANODA-KATODA TERHADAP BERAT LAPISAN HASIL ELEKTROPLATING NIKEL PADA ALUMUNIUM ALLOY SERI 7075-T6

Dedy Dwi Setiawan; Ferry Setiawan; Sehono

doi:10.52158/jamere.v2i2.380

Dedy Dwi Setiawan Teknik Dirgantara, Teknik, Sekolah Tinggi Teknologi Kedirgantaraan Yogyakarta
Ferry Setiawan Teknik Dirgantara, Teknik, Sekolah Tinggi Teknologi Kedirgantaraan Yogyakarta
Sehono Teknik Dirgantara, Teknik, Sekolah Tinggi Teknologi Kedirgantaraan Yogyakarta

DOI: https://doi.org/10.52158/jamere.v2i2.380
I will put the dimension here

Keywords: electroplating, weight, distance, anode-cathode

Abstract

Electroplating serves to protect surfaces that make objects made of metal-containing materials more resistant to corrosion,
make objects shiny, and make metals stronger. This research was conducted in order to determine the effect of the anode-cathode distance on the weight of the coating produced in the electroplating process. In this study, a test will be carried out
using the electroplating method to determine the effect of the distance from the anode and cathode on the weight of the nickel
layer coated on the 7075 aluminum alloy. of 3 grams, and the smallest result at the anode-cathode distance with a distance of
30 cm with a layer weight result of 1 gram. Based on the results of the data obtained, it can be concluded that the distance
greatly affects the weight of the coating where the closer the anode-cathode distance is, the greater the layer weight, and if the
anode-cathode distance is further away, the layer weight will be smaller.

References

[1] Alphanoda, A. F. (2016). Pengaruh Jarak Anoda-Katoda dan
Durasi Pelapisan Terhadap Laju Korosi pada Hasil
Electroplating Hard Chrome. ISSN 2548-737X, 1, 1-6.
[2] Billy Permadi, A. E. (2019). Proses Elektroplating Nikel Dengan
Variasi Jarak Anoda Katoda Dan Tegangan Listrik Pada
Baja ST-41. p-ISSN: 2301-6663, e-ISSN: 2477-250X, 8,
226-230.
[3] Donni Indra Nasution, A. (2018). Pengaruh Jarak Anoda Katoda
Dan Waktu Pencelupan Pada Proses Pelapisan Nikel–Krom
Terhadap Ketebalan Dan Kekerasan Lapisan Permukaan
Knalpot Sepeda Motor. Jurnal Teknik Mesin, 06, 41-49.
[4] Eko Budiyanto, D. A. (2016). PENGARUH JARAK ANODAKATODA PADA PROSES ELEKTROPLATING
TEMBAGA TERHADAP KETEBALAN LAPISAN DAN
EFISIENSI KATODA BAJA AISI 1020. Jurnal Teknik
Mesin Univ. Muhammadiyah Metro, 5. Retrieved from
http://ojs.ummetro.ac.id/index.php/turbo
[5] Setiawan, F. (2022). Pengaruh Variasi Waktu Proses Hot Dipping
Alumunizing Coating Stainless Steel 304 Terhadap
Karakteristik Material Dan Konduktivitas Termal . Journal
Of Mechanical Engineering, Manufactures, Materials And
Energy.
[6] Syafrul, H. (2016). Pengaruh Komposisi Laturan Kimia Dan Waktu
Pelapisan Chrom Terhadap Ketebalan Dan Kekerasan
Lapisan Permukaan Pada Plat Kuningan

THE EFFECT OF THE ANODE-CATHODE DISTANCE ON THE WEIGHT OF NICKEL ELECTROPLATING RESULTS ON ALUMINUM ALLOY SERIES 7075-T6

Abstract

References

JAMERE
Journal of Applied Mechanical Engineering and Renewable Energy