EFFECT OF IMMERSING NACL AND NAOH ON THE MANUFACTURE OF ARECA FIBER COMPOSITES WITH THE VACCUM BAGGING METHOD

  • septio Novanto STTKD YOGYAKARTA
  • Sehono Teknik Dirgantara, STTKD Yogyakarta
  • Ferry Setiawan Teknik Dirgantara, STTKD Yogyakarta
DOI: https://doi.org/10.52158/jamere.v2i2.359
I will put the dimension here
Keywords: Composite, areca fiber, vacuum bagging

Abstract

Composites are widely used in household appliances, as well as in the industrial sector. This is because composites have several advantages such as composite materials are stronger, more flexible and also resistant to corrosion. At this time betel nut is already used in the medical and cosmetic fields. However, the consequences of this processing still leave waste in the form of betel nut fiber. Such potential can be used as fibers in the manufacture of composites. The manufacture of composites this time uses lycal resin as a matrix and uses the vaccum bagging method. This study aims to determine the technical analysis and mechanical properties of making betel nut fiber composites to obtain tensile and bending strength results. The tensile test refers to ASTM D-638 and the bending test refers to ASTM D 790. In the NaCl immersion variation, the highest tensile value was obtained, namely 21.78 MPa, and in the NaOH immersion variation, the highest tensile value was obtained, which was 30.21 MPa. in the bending test the Immersion variation NaCl got the highest bending strength value with a value of 509.58 MPa and for the immersion variation NaOH got the highest bending strength value with a value of 555.82 MPa

References

Agustiar, P., Pracoyo, W., & Azharul, F. (2021). Analisa Sifat Mekanik Bahan Komposit Polimer Diperkuat Lembaran Serat Buah Pinang Akibat Beban Tarik Ade. Jurnal Rekayasa Material, Manufaktur Dan Energi, 2(2), 131–139.

Setiawan, F., Ardianto, H., & Dirgantara, T. (2018). Karekteristik Sifat Mekanis Kekuatan Tarik Komposit Nano Partikel Daur Ulang PET Dengan Limbah Abu Bagase Boiler. 5(2), 30–44.

Pratama, M. A. (2020). Analisis Pengaruh Post Curing Treatment Dan Perendaman Air Laut Terhadap Kekuatan Tarik Komposit E-Glass Ew 135 Lycal Dan Komposit E-Glass Ew 135 Vinyl Ester Dengan Metode Vacuum Infusion Untuk Pengembangan Material Float Pesawat Berpenumpang.

Mesin, J. T., Sains, F., & Cendana, U. N. (2016). Analisa Kekuatan Tarik dan Bending pada Komposit Widuri - Polyester. 03(02), 11–20.

Nugroho, U., Leaf, A., Glass, F., & Clay, F. (2017). Halaman judul studi sifat mekanis komposit hibrid.

Siagian, E. M. (2017). Sifat Komposit Berpenguat Serat Buah Pinang. Sifat Komposit, 3(Fiber Composite), 1–98.

Muhajir, M., Mizar, M. A., & Sudjimat, D. A. (2016). Analisis Kekuatan Tarik Bahan Komposit Matriks Resin. Jurnal Teknik Mesin, 2, 1–8

Yusriah, L., Sapuan, S. M., Zainudin, E. S., & Mariatti, M. (2012). Exploring the Potential of Betel Nut Husk Fiber as Reinforcement in Polymer Composites: Effect of Fiber Maturity. Procedia Chemistry, 4, 87–94.

Pambudi, aji., Moh, Farid., N, Haniffudin(2017). Analisis Morfologi dan Spektroskopi Infra

Merah Serat Bambu Betung (Dendrocalamus

Asper) Hasil Proses Alkalisasi Sebagai Penguat

Komposit Absorbsi Suara. Jurnal teknik ITS.

Lutfi, F. (2018). Pembuatan Model Papan Selancar Komposit Vacuum Bagging.

Published
2022-11-03
How to Cite
septio Novanto, Sehono, & Ferry Setiawan. (2022). EFFECT OF IMMERSING NACL AND NAOH ON THE MANUFACTURE OF ARECA FIBER COMPOSITES WITH THE VACCUM BAGGING METHOD. Journal of Applied Mechanical Engineering and Renewable Energy, 2(2), 47-51. https://doi.org/10.52158/jamere.v2i2.359
Section
Articles