Rancang Bangun Mesin Poles untuk Material Logam

  • Devi Eka SeptiyaniArifin Politeknik Negeri Bandung
  • Zidan Afriansyah Politeknik Negeri Bandung
  • Destri Muliastri Politeknik Negeri Bandung
  • Ilham Azmy Politeknik Negeri Bandung
  • Albert Daniel Saragih Politeknik Negeri Bandung
DOI: https://doi.org/10.52158/jamere.v4i2.944
I will put the dimension here
Keywords: polishing machine, design, drive motor, steel material

Abstract

The polishing machine is widely used as an instrument to shine or smooth the surface of an object, one of which is a specimen before and after the electroplating process. The objects polished with this machine become shinier and perfectly clean. This research includes several stages: (1) Design, (2) calculation and component selection, (3) fabrication and assembly of components, and (4) functional testing of each component. The results showed that the polishing machine can function well according to standards. The polishing machine that has been made works using electrical energy from a 1 HP 1 Phase motor with a power of 0.75 kW and a rotational speed of 2800 Rpm. It was concluded that this polishing machine had succeeded in restoring function and performance with several aspects of change which increased tool performance. The results on steel material show that corroded steel can turn clean and shiny after the sanding process is carried out with the polishing machine.

References

[1] R. W. Ilham Heru Setiawan, Gatot Eka Pramono, “Rancang Bangun Mesin Belt Sander,” Almikanika, vol. 5, no. 2, pp. 46–55, 2023, doi: https://doi.org/10.32832/ almikanika.v5i2.13890.
[2] A. Ikma Putra, Y. Yetri, and M. Maimuzar, “Rancang Bangun Mesin Amplas Dengan Sistem Mekanis Belt,” J. Tek. Mesin, vol. 11, no. 2, pp. 63–69, 2019, doi: 10.30630/jtm.11.2.169.
[3] M. I. Almadani and R. Siswanto, “Proses Manufaktur Mesin Poles Dan Ampelas Untuk Proses Metalografi,” Jtam Rotary, vol. 2, no. 1, p.15, 2020, doi: 10.20527/jtam_rotary.v2i1. 2001.
[4] Widarto, “Pembuatan Mesin Poles untuk Pengrajin Perak di Kota Gede, Yogyakarta Guna Meningkatkan Kapasitas Eksport,” Inoteks, vol. 5, no. 1, pp. 13–22, 2003.
[5] F. B. Susetyo, M. Muslih, M. A. Febrianto, and B. Basori, “Rancang Bangun Mesin Poles Piringan Tunggal (Single Disc) Untuk Proses Metalografi,” J. Ilm. Giga, vol. 24, no. 1, p. 17, 2021, doi: 10.47313/jig.v24i1.1070.
[6] W. K. & A. Saidah, “Rancang Bangun Mesin Pemotong Penggosok Logam Dan Non Logam Metal and Non Metal Cutting Machine Design,” J. UTA 45 Jakarta, vol. 7, pp. 1–11, 2022, doi: https://doi.org/10.52447/jktm.v7i1.5944.
[7] D. L. Caesar, “Rancang Bangun Mesin Gerinda Modifikasi Camshaft Manual,” Universitas Tidar, 2022.
[8] I. A. Saputra, G. R. Wilis, and R. Hidayat, “Perancangan Mesin Amplas Untuk Bahan Non Logam Dengan Mekanisme Sabuk Menggunakan Motor Listrik,” Maest. (Journal Mech. Electr. Eng., vol. 4, no. 3, pp. 207–208, 2022, doi: https://doi.org/10.47685/mestro.v4i01.390.
Published
2024-08-09
How to Cite
Eka SeptiyaniArifin, D., Afriansyah, Z., Muliastri, D., Azmy, I., & Daniel Saragih, A. (2024). Rancang Bangun Mesin Poles untuk Material Logam . Journal of Applied Mechanical Engineering and Renewable Energy, 4(2), 67-71. https://doi.org/10.52158/jamere.v4i2.944
Issue
Vol 4 No 2: August 2024
Section
Articles

Copyright (c) 2024 Devi Eka Septiyani A, Zidan Afriansyah , Destri Muliastri, Ilham Azmy, Albert Daniel Saragih

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)