Rancang Bangun Mesin Air Press Assy Otomatis Berbasis PLC
I will put the dimension here
Abstract
Motor vehicle light boxes require a lamp holder installation process. This study aims to automate the process of installing a lamp holder into a motorized vehicle light box through the design of an air press machine. The machine has 5 (five) process stages, namely installing the lamp box on the jig, installing the lamp holder, pressing the lamp holder, installing the lamp on the holder, taking the lamp box from the jig. The product is pressed automatically through a cylinder press mechanism. Based on the test results, it is known that the machine takes an average of 9 (nine) seconds to install the lamp and lamp holder into the light box. The result of this machine is that the time produced is 3 (three) seconds faster than the previous machine, which takes an average of 12 (twelve) seconds. The use of machines has the potential to increase productivity and workforce efficiency. The machine in this research can be developed to increase the efficiency of the assembly process.
References
Yamamoto, Y., Bellgran, M. Four types of manufacturing process innovation and their managerial concerns. Procedia CIRP. 2013; 7: 479-484.
Olukorede Tijani Adenuga and Khumbulani Mpofu.(2014) “Control system for electro-hydraulic synchronization on RBPT.” Procedia CIRP 17: 835 – 840
A.O.M.Adeoye,A.A.Aderoba and B.I. Oladapo.(2017) “Simulated Design of a Flow Control Valve for Stroke Speed Adjustment of Hydraulic Power of Robotic Lifting Device.” Procedia Engineering 173:1499-1506
Bankole I. Oladapo, Vincent A. Balogun, Adeyinka O.M. Adeoye, Ige E. Olubunmi and Samuel O. Afolabi.(2017) “Experimental analysis of electro-pneumatic optimization of hot stamping machine control systems with on-delay timer.” Journal of Applied Research and Technology 15: 356–364
WANG Hong. (2011) “Design of PLC-based Hydraulic System for Workpiece Turnover.” Procedia Engineering 15:122-126.
Sudeep Kelaginamane, Sridhar D. R. “PLC Based Pneumatic Punching Machine,” Journal of Mechanical Engineering and Automation, 2015,Vol 5(3B), pp. 76-80.
S. Primadewi Riyani, Darpono Rony, “Simulasi Sistem Kontrol Buka Tutup Pintu Gerbang Berbasis Plc Pada Trainer Sebagai Media Pembelajaran Di Politeknik Harapan Bersama,” J. Power Elektron. J. Orang Elektro, vol. 6, no. 2, p. 7, 2017.
A. Bakhtiar, “Panduan Dasar Outseal PLC”, p. 91, 2019.
SRI SUPATMI, “Pengaruh Sensor Ldr Terhadap Pengontrolan Lampu”, Maj. Ilm. UNIKOM, vol. 8, no. 2, pp. 175–180, 2010.
Subramaniam, S. K. A. L., Husin, S. H. B., Yusop, Y. B., & Hamidon, A. H. B. (2008). Machine efficiency and man power utilization on production lines. In WSEAS International Conference. Proceedings. Mathematics and Computers in Science and Engineering (No.7) World Scientific and Engineering Academy and Society.
Bruce J. Black, “Workshop Processes, Practices and Materials,” Routledge, 5th edition, 2015.
Eppinger, S., Ulrich, K. Product design and development. McGraw-Hill Higher Education. 2015: 15
Copyright (c) 2020 Tri Hannanto Saputra, Cornelius Hendriarto
This work is licensed under a Creative Commons Attribution 4.0 International License.
