Perencanaan Instalasi Air Conditioner (AC) Pada Hotel Champions

Yudi Chandra

doi:10.52158/jamere.v1i1.476

Yudi Chandra Politeknik Negeri Ketapang

DOI: https://doi.org/10.52158/jamere.v1i1.476
I will put the dimension here

Keywords: Air Conditioner, Installation design

Abstract

Comfort in a room is a necessity for everyone who is in the room, to support the activity in the room and increase work productivity, Air Conditioner is an equipment used to condition the air in a room so that it can reach temperature and humidity according to the conditions air that provides work comfort for people who do certain activities in the room. Therefore, the air conditioning system or air conditioning system (AC) has become a necessity in buildings, offices and housing, all of which can not be separated from the need for electrical energy, especially for air conditioner installations. To get air with the desired conditions, the selected equipment must match the capacity according to the cooling load in the room, for this final project special installation planning for Air Conditioners is done, namely calculations to determine the cooling load according to the room, as well as conductor selection in accordance with the calculation load, from the calculation results, obtained the number of air-cooled loads or first-floor Champion hotel air conditioner is 108,692 BTU / day with a total power of 7,920 watts, and the appropriate cross section based on the count is 1.5 mm2, and the main safety (MCCB) is 25 A.

References

[1] Adyanto. A. juni 2015. instalasi listrik rumah tinggal yang aman dari kebakaran.
[2] Azmi, A. 2014. Studi Perencanaan Kebutuhan Instalasi Listrik Di Rumah Sakit Bersalin Jeumpa. Universitas Tanjungpura, Pontianak.
[3] Badan Standarisasi Nasional SNI 04-0225-2000, Persyaratan Umum Instalasi Listrik 2000, Yayasan PUIL 2000, Jakarta.
[4] Capenberg. D. Audry, Jumhan. A. Analisis Kinerja Sistem Pendingin Ruang Palkah Ikan Dengan Menggunkan Refrigeran R-22 dan Hidrokarbon (MC-22) Jurnal Kajian Teknik Mesin Vol.2 No.1 2017.
[5] Ismansyah, 2009. Perancangan Instalasi Listrik Pada Rumah Dengan Daya Listrik Besar. Univesitas Indonesia, Depok
[6] Nurfitri, Notosudjono D, Machdi. R. A. 2016. Studi Perancangan Instalasi Listrik Pada Gedung Bertingkat Onih Bogor. Universitas Pakuan, Bogor.
[7] Lutfhi. M. A, 2010. Perhitungan Termis Kemampuan Hantar Arus Kabel Bawah Tanah 20 KV Pada PT.PLN (Persero) Area Pontianak. Universitas Tanjungpura, Pontianak.
[8] Mustofa, budi, 2017. Perancangan Instalasi Listrik Gedung Rumah Sakit Alisha Rahman Sejahtera Karawang, Universitas Muhammadiyah, Surakarta.
[9] Septiansyah Fajar. Rekonstruksi panel distribusi daya listrik. PP-IB laboratorium instalasi listrik Polteknik Negeri Bandung menurut standar SNI PUIL 2000. Tersedia [Online] https://studylibid.com/doc/608643/rekonstruksi-panel-distribusi-daya. (Diakses pada tanggal 26 juni 2019, 16:19 Wib)
[10] Surismantoo, M. Haiban, A.S. 2018. Instalasi Listrik Tenaga. e-ISBN: 978-602-5850-58-5.
[11] Susanto, A, Arnas, Y., ST., M.Si, Hidayat, Z, 2017. Analisis Kebutuhan Beban Pendingin Dengan Metode Cooling Load Temperature Difference (CLTD) Pada Ruang Lobby Gedung Simulator Sekolah Tinggi Penerbangan Indonesia. Jurnal ilmiah Langit Biru Vol.10 No.3. sekolah Tinggi Penerbangan Indonesia Curug, Tangerang.
[12] Wahid, A, Ir. Junaidi, MSc, Dr. Ir. H. Arsyad, I, M. MT. 2013. Analisis Kapasitas Dan Kebutuhan Daya Listrik Untuk Menghemat Penggunaan Energi Listrik Di Fakultas Teknik Universitas Tanjungpura. Universitas Tanjungpura, Pontianak.
[13] wahyu H, Piarah, Zuryati Djafar, Amrullah., september 2017. Analisa Kinerja Mesin Refrigerasi Rumah Tangga Dengan Variasi Refrigeran. Makasar. ISSN 2477-3506. Volume 3, Nomor 2, September 2017.